Bộ gia nhiệt hỗ trợ cắt wafer bằng laser

Sat, 06 Jun 2026 01:41:29 +0800

Out on the line, laser dicing is all about turning thermal budget into yield. If the support heater starts drifting, kerf quality falls apart, and you start seeing micro-cracks run across the wafer. We built this laser wafer dicing support heater to keep temperature stable, repeatable, and particle-free—because process windows at advanced nodes don’t have room for variability.
What matters under the hood
The setup pairs a short-wave infrared emitter with a low-thermal-mass quartz module, hitting wafer-level uniformity of ±0.1°C across the active zone. Response is quick, with controlled ramp/soak profiles that keep cycle time tight and still avoid thermal overshoot. It plays by cleanroom rules, too: Class 1–100 compatibility and zero particle generation keep defect counts down—not just on the report, but in day-to-day particle monitoring. You get repeatable output around the clock; field data shows sustained performance beyond 5,000 hours with no unplanned downtime tied to the heater module.
Here’s the thing with laser dicing: substrate temperature has to be predictable to manage brittle fracture and cut chipping. With this support heater, the thermal profile stays steady, so the laser sees consistent material response. That means cleaner kerf edges and less scrap.
And the same platform can pull double duty on photoresist bake—soft bake and hard bake—where temperature accuracy directly affects linewidth control and profile. It’s also designed to be efficient: tight coupling, low standby losses, and duty-cycle control knock down kWh per wafer without sacrificing precision.
Installation is straightforward, but the module needs a solid mechanical interface and proper shielding so stray reflections don’t wander near the laser path. Match voltage and connector type to your equipment specs; mismatched cabling can inject noise into the temperature feedback.
Plan on periodic calibration checks to hold that ±0.1°C uniformity over time. This isn’t a fit-and-forget part—it’s a process instrument, and it needs discipline.

Tia La Ze on Enhance Your Warm IR Life

Bộ gia nhiệt hỗ trợ cắt wafer bằng laser